- Rotary Frequency Converters
- Rotary Frequency Converters & Motor Generator Sets: Belt Coupled
- Rotary Frequency Converters & Motor Generator Sets : Direct Coupled
- Rotary Frequency Converters & Motor Generator Sets : Common Shaft
- Rotary Frequency Converters: Power Line Conditioners
- Solid State Frequency Converters – AC Power Sources
- Triathlon III Economical Frequency Converters
- Triathlon Precision AC Power Source - Adjustable Frequency Converter
- Triathlon Uninterruptible Power Supply System - UPS
- Brushless Permanent Magnet Generators & Alternators
- SERIES 30 - Brushless Permanent Magnet 400 Hz Generators - 150VA to 3 kVA
- SERIES 33 - Brushless Permanent Magnet 400 Hz Generators - 2.5 to 20 kVA
- SERIES 36 - Brushless Permanent Magnet 400 Hz Generators - .25 to 20 kVA
- SERIES 39 - Brushless Permanent Magnet 400 Hz Generators - 3 to 18.75 kVA
- Design Converter
- Frequency Conversion Guide
- World Power Guide (PDF)
- Refurbished and Surplus Equipment
- Downloads
- About Us
- Contact
- Home
 |
|
ROTARY FREQUENCY CONVERTERS:
Belt-Coupled Motor Generator Sets
60-50-400 Hz Conversion to 500 KVA
The simplest and least expensive method of coupling the drive motor to the generator is by use of drive belts and pulleys. This method not only transfers the energy from motor to generator, but also is used to change the frequency by pulley ratios. Inherently available in this process is phase and/or voltage conversion.
SPECIFICATIONS
- Economical gen sets; connected by belts/pulleys
- Rotary frequency converter power ratings 1-500 KVA
- Complete electrical isolation from harmonics, spikes.
- High efficiency induction motor
- Synchronous generator w/voltage regulator.
- Tight frequency regulation (+/-1%)
- Waveform: THD < 5%
Convert your exact frequency conversion requirements into a specific Georator model number, by using the Model Part Number Chart. You will then be prompted to submit this number to Georator.
